Tel-Splice the conventional tool The special construction of tongs excludes the possibility of damaging the connector with the pressing with the excess effort.

Tools AMP STACK for the 25- paired and 20- paired modules Weight 1,7 kg. With the pressing of vein as far as the diameter of 0,5 mm the effort is not more than 25 kg. using a special adapter, it is possible to begin pressing 20- paired module. 25- paired tool before the compact trunk [PN] 318433-2

The auxiliary equipment Universal holder for 10- and the 25- paired tool for the fastening on the cable [PN] 790144-1

the 20- paired adapter [PN] 356325-1

Complete set of burner with the tool Of torch-tool-kit Tools for the installation of the heat-shrinkable articles Into complete set enter the tools and the equipment, recommended for the safe and correct installation of the heat-shrinkable articles. Characteristic of the burner: - the simple replacement of sprayers; - convenient size control and type of flame; - universal valve for the adjustment of flame and disconnection of burner; - the flexible coupling of hose for the sake of the burner, excludes mechanical stress and deformation; - the improved construction of handle ensures ease and reliability of burner, and also increases the period of the service of complete set.

Composition of the complete set

	Complete set of №1	Complete set of №2
Handle	1	1
Sprayer 20 mm	1	1
Sprayer 30 mm	1	1
Hose 4 m	1
Open-end wrench	1
Pressure regulator (without the function of gas control)	1	-
Pressure regulator (with the function of gas control)	-	1

Marking for the order Complete set 1 (Tool-Kit 1) Complete set 2 (Tool-Kit 2)

Universal chopping knife for the working-out of cable sheathing KMS- K - it is intended for the working-out of cable sheathing of all diameters, - it makes it possible to make at any point of cable, - is provided the possibility of the adjustment of the depth of cut, - it is convenient before the rotation, - is excluded the possibility of damaging the fibers (veins), - rapid and simple change it climbed [viy], - it does not require maintenance.

Universal chopping knife KMS- K for the working-out of cable sheathing - this is simple, convenient, the not requiring the application of mechanical force tool, which makes it possible to make flat longitudinal sections at any point of cable sheathing of any diameter. Chopping knife is delivered before the plastic case; into complete set enter 2 adaptations for splicing of the cables of different diameter and keys, utilized for replacing the blades.

Adjust the depth of the section of the shell (see instruction down the chopping knife); before the shear put the blade of chopping knife under cable sheathing.	Chopping knife makes it possible to dress any cable sheathings of all diameters. In order to dress cable, simply raise and then, pressing, you will lower the handle of tool.
For fulfilling the longitudinal cut on the cable, you will place knife at the necessary point of cable and you will lower handle. Blade will cut cable sheathing against the preestablished depth.

Composition of the complete set - chopping knife for the working-out of cable sheathing, - adaptation for the working-out of cable sheathing with diameter to 25 mm (gray color), - adaptation for the working-out of the sheathing of optical cable (yellow), - instruction beyond the application, - key. Spare parts spare blades (10 pcs), order themselves separately.