Shielding case for the fiber-optic welded adhesions Shielding cases SMOUV-1120 for the fiber-optic welded adhesions are intended for restoring the shell of fiber and guarantee of protection of welding zone from mechanical damages and environmental effect. Composition of case SMOUV: - rod through the stainless steel for guaranteeing the mechanical hardness of adhesion in the places protected before the welding; - low-temperature thermo-fusible glue for [germetezatsii] of adhesion and guarantee of mechanical strength; - the transparent heat-shrinkable tubing.

Outside diameter of case after shrinkage - 2,4 mm; it can be used for the fiber both with the acrylic shell (diameter of 250 microns) and for the fiber with the nylon shell (diameter of 900 microns).

Types of cases SMOUV

Information for the order (sizes they are given before the mm.)

SMOUV 1120-01	SMOUV 1120-02

Universal case SMOUV - is [rekomendovana] to the use before the cassettes of high capacity (to 24 welded adhesions of the company Of tyco Of electronics)

SMOUV 1120-03	SMOUV of 1120-R2/12-02

Adapts, where [rekomendovano] the use of the very short cases

Composition of the complete set:

1. the thermo-fusible glue
2. rod through the stainless steel
3. the heat-shrinkable tubing

The shrinkage of case is conducted with the aid of the appropriate heater (furnace).