General information Modules QDF Brackets Accessories QDF Modules of protection QDF Tool QDF Metallic framework 1. General information QDF - unique [patentovannaya] development of company [Tayko] Electronics [Raykhem], that uses contact of cylindrical form. Entire family of the cross-connecting equipment is produced on the basis of this skirting: skirtings, boxings down 20, 30, 50, 100 and 600 pairs, cabinets, different types of protection, commutation and test cords, and other necessary equipment. The family of the commutating modules QDF ensures the rapid, light and reliable commutation of wires before the crosscountry races on the basis of these modules, it can be established before the accomodations or before the cabinets outdoors.
Connection occurs due to the unique system of cutting by the cylinder of the isolation of the [razedinennogo] contact, ensuring the high reliability of connection, satisfying the rigid requirements of those presented before the branch of connection, by servicemen, and also to electrical and mechanical requirements with the work of the under varied conditions environment. Commutation occurs due to the usual piling of the wire above the contact and its pressure beside the cutting cylinder beside the manual or using an erecting tool. Wire is cut by the contact surface of cylinder, but not by tool, avoiding in this case the problems with the damage of erecting tool, which can appear before other cross-connecting systems. During cutting of wire, each vein is cut completely, without leaving the remainders of wire before the contact. Skirtings can they are established from different framework.
There are three types of the commutating skirtings: QDF- E (E with the grounding) the commutating skirting. 10 paired connecting module with the united grounding. For the frontal use is not required the cleaning, twisting or soldering of cables. The construction of module makes it possible to make lines before both directions without the removal of cable. For this module there is a 3- point and more advanced 5- point individual protection. The gas-discharge tube is used for surge protection, while posistor is used for the protection on the current.

QDF- M the commutating skirting. 8- paired connecting module. It is used before the equipment DDF. This skirting is not grounded; therefore protection on the current and the voltage is not established beyond it.

QDF- I (I for the connection) commutation skirting. 10- paired connecting module. This skirting is not grounded; therefore protection on the current and the voltage is not established beyond it.

---

2. Modules QDF

2.1. QDF- E (WITH THE GROUNDING) THE COMMUTATION SKIRTING

Name Code The factory serial number Color QDF-E1 7-1190044-6 005860-000 white 10 paired skirting is marked by 1-0.      Material:  poly-ester. Packing: box of 10 skirtings.
Name Code The factory serial number Color QDF-E1P 3-1195504-2 701381-000 white 10- paired skirting is marked by 1-0. Material: basis poly-ester, upper part is polycarbonate. Packing: box of 10 skirtings.
Name Code The factory serial number Color QDF-E1P- G 2-1193296-1 438580-000 gray 10- paired commutation skirting is marked by 1-0. Packing: box of 10 skirtings. Material: basis poly-ester, upper part is polycarbonate. (This frequently it is used as the first before group of 10 skirtings for marking of the beginning of 100- paired block).

2.2.    QDF- M THE COMMUTATION SKIRTING

Name Code The factory serial number Color QDF- MO 8-1192840-2 379809-000 white   8- paired commutation skirting marking 0-7. Material:  poly-ester. Packing: box of 10 skirtings. Name Code The factory serial number Color QDF-MO- G 5-1190884-5 121505-000 gray 8- paired commutation skirting marked by 0-7. Material:  poly-ester. Packing: packing of 10 skirtings.

Price see before the division the price list “communication equipment”

---

3. Brackets

3.1.QDF- E THE BLOCK

Name Code The factory serial number QDF-1QO-OSP 0-1190597-8 080450-000 Block consists of: - One 10 paired gray skirting, - 9 10 paired white skirtings, - 10 white marking flags (par.[Kh]) - 1 gray marking flag (grupo) - 10 right guiding cables - the numbering lath is gluing for the marking flags Material: skirting - poly-ester/polycarbonate.
Name Code The factory serial number QDF-100-CB 0-1193678-8 491766-000 100- paired QDF- E block consists of: - 10 10 paired skirtings - 10-[pozitsionyy] the mounted framework with 40 mm by the reserve - 4 mounting screws and the washer - one marking cover - two marking gluings (1 pink, 1 blue) - one [khomutok] Material:  skirting - poly-ester/polycarbonate, the framework through the stainless steel.
Name Code The factory serial number QDF-100G-CB  0-1197032-6 904924-000        100- paired QDF- E is [gelezapolnenyy]. Block consists of: - the 10- position assembly framework with the distance of reserve 40 mm. - cylindrical protection before the opening of the framework for the supply of the cable - one gray [gelezapolnenyy] QDF- E the skirting - 9 of white [gelezapolnenyy] QDF- E the skirting - 9 white marking flags (designating 11-20, 21-30…. 91-100) - 4 assembly screws, nut and the washer - one marking cover - two gluings (1 pink, blue) - one [khomutok] Materials: skirting - poly-ester/polycarbonate, the framework through the stainless steel.
Name Code The factory serial number QDF-MDF-MK 7-1194207-1 535979-000          Complete set for the framework This complete set is used for the installation of the framework on the counters. Complete set consists of: - 4 assembly screws and the nuts - 4 plastic hooks

3.2. QDF- M THE BLOCK

Name Code The factory serial number QDF- M -128COb 5-1194053-0 516169-000   128- paired QDF- M the block Block consists of: - 1 gray 8- paired skirting - 15 white 8- paired skirtings - 4 assembly screws and the washers - 4 plastic hooks - 1 gray marking cover - 15 white marking covers - 16 white marking gluings - 16 right guiding cables - the 16-[pozitsionoy] assembly framework with the distance of reserve 30 mm.

Price see before the division the price list “communication equipment”

---

4. Accessories QDF

4.1. INSERTS AND THE MARKERS

Name Code The factory serial number Color QDF-1BBL 7-1191224-1 168195-000 black QDF-1BR 7-1194768-4 602442-000 red            Opening insert For use with QDF- E and QDF- M. Box with 100 pcs Name Code The factory serial number Color QDF-DB 8-1191107-7 153332-000 black QDF-DR 3-1194252-5 542334-000 red Blocking insert For use with QDF- E and QDF- M. Box c of 100 pcs Name Code The factory serial number Color QDF-MB 8-1190211-9 027378-000 black QDF- MG 5-1197029-8 904574-000 green QDF-MR 7-1194792-0 605752-000 red [Markirovachnaya] insert For the use with QDF- E, THE QDF- I and QDF- M. Box based on 100[sht].

4.2. MARKING ACCESSORIES

Name Code The factory serial number Color QDF-ED 2-1197314-2 944976-000 white QDF-EDG 3-1191182-1 163823-000 gray Marking cover for QDF- E of the skirting Material: polycarbonate. Standard container: box of 10,10 boxes in the box. Name Code The factory serial number Color QDF- MD 1-1192645-5 351803-000 white QDF-MD- G 6-1190435-7 057319-000 gray Marking cover for QDF- M of the skirting Material: polycarbonate. Standard container: box of 10, 10 boxes in the box. Name Code The factory serial number Color QDF-ID 5-1195344-1 679830-000 white QDF- I marking cover Material: poly-ester. It is packed beside the boxes of 150 pcs Name Code The factory serial number Color QDF-DLB 9-1195218-9 662104-000 blue QDF-DLW 9-1195673-6 725972-000 white QDF-DLY 8-1194612-6 582272-000 yellow QDF-DLV 1-1197606-9 984558-000 violet. QDF-DLR 5-1190366-4 047710-000 red Marking gluings beyond the covers for QDF- E & OF THE QDF- I Is allowed identical length the sticking paper. Box of 50 pcs

4.3. GUIDES OF THE CABLE

Name Code The factory serial number Color QDF-DWGW 1-1197278-6 939872-000 white Dual guiding for QDF- E of the skirting It is supplied in the boxes of 25 pcs
Name Code The factory serial number Color QDF-LWGW 2-1193633-8 485501-000 white Left guide of cable for QDF- E of the skirting It is supplied in the box of 25 pcs
Name Code The factory serial number Color QDF-RWGW 7-1193630-5 485124-000 white Right guide of cable for QDF- E of the skirting It is supplied in the box of 25 pcs
Name Code The factory serial number Color QDF-MRWGW 8-1194621-0 583541-000 white Right guide of cable for QDF- M It is supplied in the box of 25 pcs

4.4.1 the 4- controlling -[izmeritelnye]/[soedinitelnye] cords

Cords for the use with QDF- E & QDF- M by skirtings.

x of =[metry] Code The factory serial number x=2 4-1197592-7 982654-000 x=5 6-1196598-6 845916-000

Monitoring and measuring insert - with 1 open end
Color: insert - black, cord - gray.

4.4.2 the 4- connecting cord

Cords for the use with QDF- E & QDF- M by skirtings.

x of =[metry] Code The factory serial number x = 2 6-1190680-5 092764-000 x = 4 4-1195173-2 655878-000

Connecting monitoring and measuring insert:
with 1 open end. Color: insert is black, cord gray.

This is the universal insert, which is suitable for all measurements (with exception of protection). Consequently - this a good selection for is much purposeful use.

Price see before the division the price list “communication equipment”

---

5. MODULES OF PROTECTION QDF (ONLY FOR the modules QDF- E)

Name Code The factory serial number Color QDF-3CGS-230 1-1192450-9  323726-000  gray QDF-3CGS-260 4-1195268-3 669104-000 gray 3- point surge protection, 230 [v] or 260 [v] (gas-discharge tube) It is packed beside the boxes of 100 pcs
Name Code The factory serial number Color QDF- PR -5SS-22Q-rs 1-1196188-7 800290-000 it is blue. 5- point from the overvoltage and the protection on the current, [nebololshoy] size, 220 [v] the gas tube It is packed beside the boxes before a quantity of 100 pcs
Name Code The factory serial number Color QDF- PR -5Gt-230-rs 7-1198253-8  906432-000 gray QDF- PR -5Gt-260-rs 6-1192362-9 312272-000 gray           5- point from the overvoltage and the protection to [po].[toku], the small size, 230 V or 260 [v] gas tube. It is packed beside the boxes before a quantity of 100 pcs

Price see before the division the price list “communication equipment”

---

6. Tool QDF

Name Code The factory serial number QDF- AC -TOOL-888 2-1194636-9  585588-000 Erecting tool. Standard length (for QDF-814).
Name Code The factory serial number QDF- AC -TOOL-888m 9-1195418-3 690070-000 Erecting tool. Average length
Name Code The factory serial number Color QDF- AC -TOOL-Dw1 1-1193449-0 459824-000 black Erecting tool. Average length for the possible work with the short protection.
Complex insertable tool This accessible tool for the possible use after basic work on installation was intended finished to, for instance, make several new [dzhamper] connections. It is possible to use more than 40 times it. For the installation of [dzhamperov] of cords with diameter from 0.64 mm. Material: Polyarylamide/fiberglass.

Price see before the division the price list “communication equipment”

---

7. Metallic framework

6.1. STANDARD ASSEMBLY FRAMEWORK

Name Code The factory serial number QDF-11-05A  9-1197221-5 931746-000 Assembly framework: 11 mm the distance of reserve down 5 positions. It is packed beside the box of 10 pcs Material: Stainless steel.
Name Code The factory serial number QDF-11-10A 0-1192961-2  394700-000 Assembly framework: 11 mm the distance of reserve down 10 positions. It is packed beside the box of 10 pcs Material: Stainless steel
Name Code The factory serial number QDF-30-10A 1-1197727-9 999504-000 Assembly framework 30 mm the distance of reserve down 10 positions. The material is packed beside the box of 10 pcs: the stainless steel.

6.2. MDF THE ASSEMBLY FRAMEWORK

Name Code The factory serial number QDF-30-10A-MDF 5-1194018-0 511230-000 Assembly framework: 30 mm of the races of reserve down 10 positions. Assembly complete set (QDF-MDF-MK) consists of (4 screws, washers and plastic hooks). It is packed beside the box beside the stake 10 pcs Material: Stainless steel
Name Code The factory serial number QDF-30-62A-MDF  6-1194413-4 559107-000 Assembly framework 30 mm of the races of reserve on 62 positions. It is packed individually. Material: the stainless steel.

6.3. QDF- M THE ASSEMBLY FRAMEWORK

Name Code The factory serial number QDF-30-16A-MDF- M 1-1194214-6 536889-000 Assembly framework for QDF- M of skirtings. 30 mm of the distance of reserve, 16 positions. Material: the stainless steel