Connectors - this reliable and economical means for the inosculation of telephone cables, they make it possible to save time and to increase the quality of connections instead of earlier than the utilized works of those connected for the sake of the cleaning of isolation, the joining, the soldering and insulating of veins.

The connection of veins before the contact occurs due to the pressing of the plastic housing of connector with the aid of the special tool.

Connector consists of contact and plastic housing. Housing, reliably protecting contact from the moisture and the chemical actions, as a rule, are made from the polypropylene. For the special conditions of applying the connectors, is used polycarbonate, which does not support combustion.

Tel-Splice adapt with the veins by diameter from 0,4 mm to 0,9 mm with different types of isolation before any they [sochetaniyakh].[Sushchestvuyut] the versions of connector for two and three veins, for the direct inosculation and the branching off.

All forms of the connectors Of tel-Splice (bodies -[Splays]) can be both before the dry version and with the moisture-repelling filler, which completely protects contact from the action of moisture. Time with the installation is saved, since the preliminary cleaning of wires is not required.

The technology of connection for the sake of the puncture of isolation ensures the very dense, immune down oxidation electrical contact. Each vein has two contact points, which increases the reliability of electric coupling. Obtaining the habits of work based on Tel-Splice of [zaymet] the minimum of time. The delivery of connectors is achieved by scattering or before the cartridges (for the application with the special tool).

Version with the moisture-repelling filler:

For two it lived (inosculation)
d of isolation to 1,63[mm] [PN]-342583-5
d of isolation to 2,03[mm] [P]H-ESOO-64

For three it lived (inosculation)
d of isolation to 1,63[mm] [PN]-342816-3
d of isolation to 2,03[mm] [PN]-552678-4

For two it lived (branching off)
d of isolation to 2,03[mm] [PN]-553017-4

Merits
High productivity.
IS NOT REQUIRED the cleaning of isolation, joining, soldering through and insulating of veins.
The different types of the connections of veins with the diameter of 0,4-0,9[mm] for the sake of different isolation.
Reliable electrical contact.