System of hermetic sealing channels TDUX [T]DU[KH] - unique pneumatic sleeve system for a constant hermetic sealing of channels of telephone conduit run. It prevents the penetration of water from the channel beside the mines of exchanges and the manholes. System is designed for the application with the plastic, concrete or steel systems of cable laying through the walls. It can be used with the cables with the lead or polyethylene sheaths.

Special features:

• Rapidly and simply it is established even before the overfilled channels.
• Very flexible and reliable sleeve system of hermetic sealing.
• Can be established even if cable or channel oval.
• One standard size adapts with the wide range of cables.
• It hermetically seals free channels and channels with one or two cables.
• There are padding for hermetically sealing several cables.
• It can be established even during the discharge of water from the channel.
• The pressure of water and air to 50 kPa is maintained.
• It does not contaminiate environment and it is nontoxic.
• Steadfast to the chemicals and the bacteria.
• Simply and rapidly it is moved away.
• There are different sizes for hermetically sealing the wide range of cable channels.

Sizes and information for the order:
Field of application: hermetic sealing free channels and channels with 1 or 2 cables **
For hermetic sealing 3 and more than cables use a fan-out TDUX- CL

Marking /[Vnutrenniy] the diameter of the channel	TDUX 35	TDUX 45	TDUX 60	TDUX 75	TDUX 90	TDUX 90	TDUX 100	TDUX- CL /[Razmer] of the fan-out
125							103	TDUX- CL -80
120							95
115							91
110						90	83
105						85
100					83	80		TDUX- CL -60
95					76	74
90					70	66
85					62	60
80					54	52
75				56	50	45		TDUX- CL -40
70				46	42
65				40	30
60			45	30	22
55			38	28
50			30					TDUX- CL -20
45		32	18
40		27
35	25	18
30	19
20	12

Packing:
TDUX-45 and the large sizes:
they are supplied before a quantity of 10 pcs to box + 1 humidifier +1 the assembly instruction
TDUX-35: 25 pcs in the box + 1 humidifier + 1 the assembly instruction
TDUX- CL the fan-out: 5 pcs in the box

Tools for the pneumatic system of hermetic sealing the cable channels:

Tools for the installation:
[T]DU[KH] can be established by any pumping adaptation, capable of pumping [T]DU[KH] up to a pressure of 3,0 ± of 0.2 bars.

Firm Tyco Of electronics proposes the following:

TDUX-IT-16 Pumping tool, which uses gas tanks with [S]O2. Gas tanks with [S]O2 contain 16 g. [S]O2 and can pump the minimum of 4 pieces [T]DU[KH]-100 before the free channels. If channels are occupied for the sake of cables, then with the aid of one balloon it is possible to pump large number [T]DU[KH]. Tool has a switch “[VKL]/[VYKL]” and a system of the automatic check of pressure (manometer), guaranteeing the necessary pressure [nakachki]3,0 ± of 0.2 bars.

TDUX-IG-SR- AS The pumping pistol, which can be connected down the oxygen cylinder or the compressor with the pressure against the output from 4 to 10 bars. Pistol contains the valve of safety and the audio indicator, which simplifies the process of installation [T]DU[KH].

Marking Characteristic Standard container TDUX-IT-16 Tool for the installation 1 pcs before the packing of the tools [E]7512-0160 16 g. CO2 before the gas tank for TDUX-IT-16 10 pcs of/[upakovka] [T]DU[KH] - IG- SR -[A]S Pistol for the pumping 1 pcs before [upkkovke] of the tools

Note:

• Adjusting tools are packed together with the operating instructions before the English.
• Of e[sli] is used tool for the pumping TDUX-IT-16, the designation Of [e]7512-0160 ([SO]2 gas tanks) it is necessary to order as separate unit.