 |
Heat-shrinkable connecting/splitting clutch XAGA 1000
Coupling for the telephone cables, which are contained under the excess pressure. It is intended for the suspension cables, and also laid directly before ground and before the conduit run. It adapts on the cables of any capacity; on the cables with the lead, polyethylene, steel and aluminum sheath. It is suitable for the use with all standard forms of connectors. |
 |
Heat-shrinkable repair sleeves CWPT
CWPT - heat-shrinkable sleeves for the compression cables. They are suitable for all types of the cables, which lay directly beside ground, conduit run or are hung up. It is intended for the application with the cables with the polyethylene and metal shell, without the filling or with the vaseline filling. |
 |
Heat-shrinkable repair sleeves SLVP
Are intended for repair and installation of the clutches of MPS ‚and MRP. Sleeves XAGA-SLVP can be established beyond all types of the cable: suspension, laid directly before ground either before the canalization, without the filling or with the hydrophobic filler, with the polyethylene and metal shell. |
 |
Interlock systems of water and air CBSM
CBSM - this is the heat-shrinkable system, specially developed for blocking of air pressure or penetration of water on the small-capacity cables. It is used on cables with the polyethylene or PVKh to shells and as far as capacity of 10 and 20 pairs. |
 |
Interlock systems of water and air ACBS
ACBS - universal pasting interlock system of cable core. It is used on the cables with the polyethylene and polyvinylchloride shell, on cables with continuous isolated [PE] and PVKh as far as conductors. |
 |
Interlock systems of water and air RPBS
System RPBS forms blocking air for entire spectrum of the cables of those finding under the excess pressure. It is used on the cables with the polyethylene or lead sheaths. |
 |
Heat-shrinkable sleeve for organizing of control point and pressurization RWPS
It adapts for all types of cables, which are contained under the excess pressure, for the pressurization before the cable, the guarantee of a point of the access beside the network under the pressure, the inspection of the value of pressure. |
 |
Tip is cap K -CAPs
Cap is covered for the sake of from within thermo-fusible glue for hermetically sealing the leads of the cable, protects from the entry of water inward. Let us use for the cables with the polyethylene and metal shells. |
