The heat-shrinkable connecting/splitting clutch [KHA]GA 500 is intended for using the cables: suspension, laid directly before ground or before the canalization, without the filling and with the vaseline filling, with the polyethylene, lead, steel or aluminum sheath.

It is intended for the use with the cables without the excess air pressure - suspension, laid before ground and before the canalization, with the hydrophobic filler and without it. Easily it is revealed and is hermetically sealed. It does not require additional tools for the installation. To 6 applied cables.

It is suitable for all types of the cables, which are hung up, lay before the conduit run or directly beside ground. The flexible system of the branching off of the cable: each port ensures hermetic sealing one or several cables. The construction of clutch ensures high resistance to mechanical actions.

Coupling for the telephone cables Of gelsnap prevents the penetration of moisture, which is reached because of the use of a stagnant gel, which is found under the constant pressure. It can be used due to the most diverse environmental conditions. Different configurations of clutch are possible (blind, passage and splitting).

The composition heat-shrinkable clutch VCKT is used as distributive for the cables before the mines of exchanges. Clutch can distribute to 20 cables of crosscountry race. It can be used with any types of cables. There is a possibility of using different number of introductions. The period of storage of clutch is not limited.

They are suitable for all types of the cables, which lay directly beside ground, conduit run or are hung up. It is intended for the application with the cables with the polyethylene and metal shell, without the filling or with the vaseline filling. The wide range of sizes is calculated at the point of the cables by diameter from 8 to 200 mm.

They are intended for repair and installation of the clutches of MPS. They are capable of maintaining the very high stretching efforts, impacts, pressing, twisting and bends of cable, the wide range of temperature and other external actions. They are established beyond all types of the cable: suspension, laid before ground either before the canalization, without the filling or with the hydrophobic filler, with the polyethylene and metal shell.

The semiflexible heat-shrinkable tubing is developed for guaranteeing the protection from the environmental effect and [germetezatsii] of a whole series of the elements, including of joints (connectors), places of the offshoot of cables, connection of electrical wires. High elasticity makes it possible to hermetically seal strongly [povrezhdennye] cable sheathings.

Heat-shrinkable tubing with the wall of average thickness. It is prepared based on high-quality cross- connected polyolefin. Tube can be supplied without the coating (for the use as the insulator) or with the thermo-fusible pasting coating, which ensures hermetic sealing and protection from mechanical damages, and also with the anticorrosive and sealing coat.

Thick-walled heat-shrinkable tubing. The high coefficient of the shrinkage of tube XCSM makes it possible to use it on the cables with different diameters of shell. It is used on the cables, which lay beside ground or are hung up. Is intended for the use, where it is required maximum reliability (underwater or underground cable laying).

Heat-shrinkable end caps for the dry or with the cable filler, which are not contained under the excess pressure. Let us use for the cables with the polyethylene and metal shells. It protects from the entry of water inward and thus the longest possible storage of cable without the risk of the penetration of moisture.