|
THE CATALOG OF EQUIPMENT” joint stock company of Research and Production Enterprise “range”
- Optical modems and multiplexers E1:
- [PoliKom]®-200C, by floor panel -200U, by floor panel -200UK, by floor panel -200[M], by floor panel -200[M]K,
By floor panel -200U-1Gb, by floor panel -200T, by floor panel -300U, the Floor panel-300U- I, by floor panel -300M, by the floor panel -300[T] - Equipment of the redundancy
- By floor panel -740
- Bridges Of ethernet of over E1
- [Arlan]-1451
- Equipment for testing the channel Of [e]1
- [Irgiz]-[E]1
- Servers of devices RS232
- [Arlan]-9000-1RS232, [Arlan]-9000-16RS232, [Arlan]-9000-6RS232
- Devices of the access Of [e]1
- [PoliKom]®-741, [PoliKom]®-741-VCh, [PoliKom]®-741-FCh, [PoliKom]®-741[M], [PoliKom]®-741[M]-2RS
- [Konstruktivy]
- Chassis -3U-15-1, shelf beside counters 19 " for the housing Of g706
- Modules
- Block U -1, the module of 8[kh]E1, the module of 8[khTCh]
|
|
| Producer: Joint stock company of Research and Production Enterprise the range
Equipment Of [arlan]-9000-6RS232 is intended for the connection to 6- TI of devices with the interface RS-232 to Ethernet to networks.
Equipment Of [arlan]-9000-6RS232 ensures the bidirectional transmission of the data between the devices with the sequential interface above the medium IP and it makes it possible to centralizedly govern devices with the sequential interface through the medium IP.
Equipment Of [arlan]-9000-6RS232 can be used for:
- the extension of the remote control ATS on the interface RS-232;
- the connection of the remote devices for the sake of the sequential interface;
- centralized control besides devices with the sequential access;
- the construction of the industrial networks of control;
- data collection based on the territorially remote equipment with the joints RS-232.
For the installation of article beside the standard counter (cabinet) is provided special shelf - regiment beside counters 19 " for the housing Of g706.
![[Arlan]-9000-6RS232, the servers of devices RS232.](arlan9000_big.jpg) |
The special features of this equipment are:
- control through RS-232, Telnet;
- mapping the current state by light-emitting diodes.
Diagram of the start
Control besides equipment is accomplished:
- on the joint F (RS-232) with the use of any standard ANSI - terminal;
- on the joint Q (Ethernet 10/100 Base- T) on the protocol Of telnet.
Technical characteristics:
| Interface Of ethernet of 10/100BaseT |
|
| Quantity |
1 |
| Joint |
RJ-45 |
| Compatability |
IEEE 802.3
IEEE 802.1q |
| Interface RS232 |
|
| Quantity |
6 |
| Joint |
USB |
| Speed |
to 115 200 bit/s |
| Control |
|
| Interface RS232 |
PO- standard ANSI- terminal |
| Interface Of ethernet of 10/100 BaseT |
Protocols Of telnet |
| Electric power supply |
|
| Stress |
DC 18- 72 [V]. [Vozmozhno] the connection of the external adapter of nourishment for AC 220 before |
| Required power |
to 1,5 W |
| The design concept and the weight |
|
| Performance |
Table, is possible installation beside 1U, 19 " |
| Before x Sh x G |
35 x of 140 x 120 |
| Weight |
200 g |
| The environment |
|
| The operating temperature |
from 5 to 40°[S] |
| Relative humidity |
from 5 to 80% |
| Atmospheric pressure |
not below 60 kPa |
Joint stock company of Research and Production Enterprise the range
|
 |
