V4200-9, the [multiservisnyy] multiplexer Producer: OlenCom V4200-9 - this is flexible 9- port [multiservisnyy] multiplexer. Depending on the selected configuration of device, which is assigned by the collection of utilized interface boards, it can be [skonfigurirovan] as:

• the device of working data links (CSU/DSU) with the possibility of the extraction \ of insert and the functions of processing the speech
• the converter Of [e]1 \ Of [t]1
• the system of digital cross- [konnekta] (DACS)
• the collector of control channels on time - to slot
• the bank of channels (channel of bank)

With the work of multiplexer as CSU/DSU, given from the port Of v.35 or X.21 they can occupy any part of the port Of [e]1. For the ports Of [e]1 is ensured the continuous control of errors, the interrogation of the quality of line, the collection of statistics and diagnostics before the service regime.

With the configuration of multiplexer as DACS is ensured the organization of the construction of the table of cross- [konnekta] with any combinations of the ports \ of time- slots. Ports can be used as ICSUs (intelligent CSU) at the point of the savings of expenditures and place before the counter. Finally, V4200-9 can be used as the bank of channels.

V4200-9 supports local control and diagnostics, using the 2nd small 40- kA symbolic LCD display and keyboard on the front panel, or using VT-100 the terminal through the cantilever port. V4200-9 also supports Ethernet, Telnet and SNMP for remote control and diagnostics. V4200-9 has a possibility in -band of control, when management teams are transferred as far as the same channels, as user given.

In addition to LCD to display device has 12 multi-color LED of the indicators: electric power supply, testing, the indicator of emergencies, 9 indicators of state for each port. Software is found before the [flesh]- memory; therefore is possible its easy replacement as far as I more flay version in the future.


Configuration

• 9 slots for interface boards with the possibility of the hot replacement
• Accessible interface boards:
  - Interface boards E1
  - Interface boards Of v.35, EIA530, RS232, X.21
  - Interface boards QFXS, QFXO, PLAR, E&M
  - Interface boards G.SHDSL, MDSL
  - Interface boards T1/E1 ATM Of frame Of relay
  - Interface board of 2xEthernet, [router] with the option of net control (SNMC)
  - Interface board Of g.703 (co -directional)
  - Interface board OCU DP
  - Module SNMP
  
• Is possible use as CSU/DSU, as converter from E1 before T1, CSU or DACS
• Possibility of complete crosscountry race -[konnekta] (TSI) against the level of time intervals (TS)
• Possibility of remote diagnostics
• the 2nd small 40- symbolic display for monitoring and control
• Control through the cantilever port, Ethernet port and SNMP
• Possibility of remote control according to IP on the time- slot through the ports E1
• LED indicators for the electric power supply, the testing, the indication of emergencies and each of 9 ports
• Easily replaceable AC or dual DC power unit
• TFTP client for the load/of the renovation of software
• Remote control through the graphic interface GUI Of olenCom Of view

Application




Specification

the Crosscountry race- commutation

• Delay is less than 400ms
• One active table, one table, which is stored for the user

Transformation of the vocal channels

• From A -law before m -law Of g.711
• The transparent transfer of signaling CAS ([A]=0 from [E]1 it becomes [A]=0 for [T]1 of [i].[t].[d].)

Electric power supply

• 30W 24Vdc or 30W 48Vdc.
• DC: 24Vdc, 3a max; 48Vdc, 1.6A max
• AC: from 90 to 240 Vac, 50Hz, 2a max

Physical parameters

• Overall sizes: 43*4,4*33[sm], 17 " *1.75 " of *13 " ([SH]*[V]*[G])
• Temperature: 0-50°[S]
• Humidity: 0-95% (without the condensation)
• Installation: table model, installation beside 19 " /23 " counter
• Weight: 3,5[kg] without interface boards

Monitoring

• Retention of the performance characteristics: In the recent 24 hours of work, recorded through the 15-minute intervals
• Reports: Channel, the user
• Productivity of the work: Date and time, Errored Of second, Degraded Of minutes, Unavailable Of second, Bursty Of errored Of second, Severe Of errored Of second, Controlled Of slip Of second, and Loss of Of frame Of count
• History of the emergency communications: Date and time, the type of emergency (i.e. Master Of clock Of loss, RAI, AIS, LOS, BPV, ES, CS)
• Threshold crossing of the errors: Bipolar Of violation, Error Of second, Unavailable Of second, Controllered Of slip Of second

Control

• Connector DB9 on the front panel
• Electrical RS232 the interface
• Menu, controlled BY VT-100 by the terminal

Ethernet port (optional)

• Connector RJ45 on the rear panel
• Protocol Of telnet and built-in SNMP

Front panel

• Keyboard: 5 buttons, ACO (stoppage of signaling), the left and right pointers of control, ESC, and ENTER
• LCD the display: the 2nd the small 40- symbolic display
• LED the indicators: 12, one for each interface slot, electric power supply, testing, the indicator of the emergency
• Bantam of the nest: Network IN, OUT the monitor

Rear panel

• Slot for positioning the module of electric power supply, the slot Of ethernet and 9 slots for interface boards

Correspondence to the requirements

• CISPR of 22 Class A, EN55022 Of class A, EN50081, EN50082, FCC Of part 15, OF FCC Of part 68, of CS -03 Of issue 8, OF CE168X, NTR4, UL1950, CSA22.2 of №950, EN60950, NEBS Of level3: GR-1089-CORE, GR-63-CORE