MC-100- C, [mediakonverter] “of optician- optician” Producer: OlenCom The family of converters MC-100- C is a series of the devices, which achieve a conversion between different optical interfaces its entrance and output.

Device ensures the transparent conversion between the signals with the different wavelengths (850, 1310, 1550 nm) and the types of optical fiber (multimode, one-mode fiber, single-fiber performance) at frequencies to 2,5 GHz.

MS-100- S can be used for the regeneration of signal at the point of an increase in the range between two optics or gives the possibility of organizing interaction between the devices with the different types of optical interfaces and wavelengths.

Converter structurally consists of two channels, which accomplish transparent transmission of information. The first channel accomplishes a transfer from the first transmitter to the second receiver, and second channel from the second transmitter to the first receiver. The transfer of signal is accomplished only with the condition of the integrity of circuit, i.e., with the condition of the reception of the transferred signal. The indication of received signal is produced based on the indications of light-emitting diode indicator beyond the front surface of device.


Configuration

• Are possible the transformations of [iz]/[v] of the modes of operation Of multi Of mode, Single Of mode, Single Of optic of [iz]/[v] of wavelengths 850, 1310, 1550 nm beside any other combination of the parameters of the optical medium of the transfer
• The speed of the transferred information is any in the range of 10 Mbit/s -2,5 Gbit/s
• Converters can be executed in the form map for the basket FM- S 19 " 2U. Basket has 14 it [platomest] and it allows down maps nourishment, ventilation
• Remote control SNMP. The remote control is based beyond the platform HP Of openView.

Application




Specification

Parameters of the device

The parameters of device depend on model, and also conditions of order and are given on the label, located beyond the device. Explanations down marking of device are given below:

Model:

MC-100-C-Axy-Bxy-Cxy-Dz-Ea- F
x the parameter of 1st channel, y - parameter of the 2nd channel

F - mechanical [konstruktiv]:

• AC - table model with the built-in power unit of alternating current of 100-240[V], 50-60[Gts]
• DC - table model with the built-in power unit of the direct current of 36-72[V]
• 6MC - module for the basket FM- S of 6MC
• 2U - module for the basket FM- S 2U

Axy - type of the optical joint of the transceiver:

1. SC - 9pin SC the transceiver
2. LC - SFP LC the transceiver

Bxy - regime of the work of the optical transceiver:

1. Mm - duplex multimode optical transceiver
2. SM - duplex one-mode optical transceiver
3. SO - Bi -Di the optical transceiver

Cxy - wavelength (for SO - the wavelength of transmitter):

1. 850 - 850[nm]
2. 1310 - 1310[nm]
3. 1550 - 1550[nm]

Dz - speed of transmission of the information:

1. 155 - 155 M[bit]/[s]
2. 622 - 622 M[bit]/[s]
3. 1250 - 1250 M[bit]/[s]
4. 2500 - 2500 M[bit]/[s]

Ea - transmission distance (optical budget):

1. S1 or it is not indicated - the standard distance
2. S2 - increased distance

Note: The special configuration of device is to order possible.


Installation
Device does not require special mounting conditions and begins to work immediately after the connection of electric power supply and optical channels.


Overall sizes

Table model:

• [VkhShkhG]: 50[kh]115[kh]155 mm
• Weight: 0,35 kgf

Module for the basket of 6MC:

• [VkhShkhG]: 20[kh]65[kh]90 mm
• Weight: 0,1 kgf

Module for basket 2U:

• [VkhShkhG]: 88[kh]22[kh]90 mm
• Weight: 0,1 kgf