|
THE CATALOG OF EQUIPMENT” LUCENT TECHNOLOGIES”
WaveStar ADM16/1 Of compact
WaveStar ADM of 16/1Compact is the truncated version of the multiplexer Of waveStar ADM 16/1. this the intellectual multiplexer and transmission system with the high capacity, which can multiplex standard speeds PDH and SDH to the higher levels, up to 2,5 Gbit/s (STM-16).
Basic merits of the system:
- Large capacity on the input-output of channels 2 Mbit/s and STM-1 (252 x of 2 Mbit/s either 48 X of 34/45 Mbit/s, or of 16 x STM-1) directly based on the level STM-16;
- Simplicity of installation and of maintenance;
- Flexibility of application;
- The improved mechanisms of redundancy make it possible to use contemporary structures of networks SDH;
- Relatively low cost of equipment;
- Low energy consumption.
The great possibilities of the transmission system SDH of the new generation Of waveStar ADM of 16/1Compact make for the sake of its one of the most economical and promising net elements, it can be used together with other products Of lucent Of technologies for the fiber-optic networks, being one of the basic standard modules of future networks SDH.
Linear interfaces:
- Optical linear interfaces STM-16 of the distant radius of action with the wavelengths 1310 nm and 1550 nm, compatible with the recommendations ITU- T Of g.957 Of l.16.1 and L.16.2.
Component ([tributarnye]) interfaces:
- 1xSTM-4 - optical interface of short range with the wavelength 1310 nm, compatible with the recommendation ITU- T Of g.957 Of s.4.1;
- 4[kh]STM-1 - electrical or optical interfaces of short range with the wavelength 1310 nm, compatible with the recommendation ITU- T Of g.957 Of s.1.1;
- 63[kh]2 Mbit/s;
- 12[kh]34/45 Mbit/s;
- 8[kh]10 T Of ethernet.
Interfaces are completely compatible with the appropriate standards ETSI and the recommendations ITU. The following characteristics of mapping are ensured:
- VC4-TUG3-TUG2-VC12-2 Mbit/s;
- VC4-TUG3-VC3-34 Mbit/s;
- Connection VC12/VC3;
- Protection SNC for VC12, VC3 and VC4.
Interfaces of control:
- F interface for the terminal (RS-232);
- Q interface for TMN (Ethernet).
Electric power supply:
- 48/60 [v], the maximum required power of 200 W (with the complete gasket).
Construction:
- the width of 450 mm
- the depth of 260 mm
- a height of 625 mm
- the mass not more than 26 kgf (with the complete gasket).
Means of control:
- For control besides the multiplexer Of waveStar ADM 16/1 it is possible to use a terminal system for local administration ITM-CIT on the base PK, connected through the sequential port down the F- interface of multiplexer. In the limits of one network are supported control besides the remote units through the built-in communication line channel (DCC), transferred before the title of sequence STM-1, STM-4, STM-16.
- Is supported control besides the manager of net elements ITM- SC through Q -LAn interface.
- The multiplexer Of waveStar ADM of 16/1Compact supports the following control functions:
- Control of the errors: It is ensured by monitoring and data analysis of that being containing before the bytes of the title of each virtual container (VC), and also by fulfilling of internal testing and functions of monitoring. Alarm signals are filtered and are represented locally, and also they are transferred down the control center. Information is written before the data base, placed on the pays of multiplexers.
- Control besides the productivity: The information about the productivity, obtained from the bytes of title (SOH and POH), is analyzed in accordance with the recommendations ITU- T Of g.784 and G.826 and remains before the base of data of devices.
- Control besides the configuration: different configurations of equipment can be loaded beside the multiplexer from the system of net control.
- Remote load of software
- Control besides the safety: The access of operator is controlled with the use of different passwords and parameters.
Price see before the division the price list “communication equipment”
|
 |