Mobile measuring platform [MTR] 9000 Instrument optical measuring multifunctional MTP 9000 (further - instrument) is intended for attenuation measuring before the optical fibers (ОВ) and their connections, the length of optical fiber and distance to the places of the heterogeneities of fiber-optic lines. Instrument can be used with the production OV and optical cables, and also installation and the operation of the fiber-optic lines of communications for the control of the state of cables and prognostication of malfunctions before them. Instrument can work before the laboratory and field conditions.

[MTR] 9000 is the multimeter, which consists besides the base controlled module with the built-in colored [dipleem] and the wide set of change measuring modules.

A successful constructive solution makes possible at the point of users to acquire different change modules to as needed and carry out all types of the measurements of optical cable. Change modules easily are established and are substituted. This excludes the need for the acquisition of completely new instruments and are decreased expenditures along the time and the means for instruction.

Before the platform is used the color picture screen with the function TOUCHSCREEN, the installation of the source of visible radiation for the fault detection of the optical fiber is provided

Change modules for the measuring platform MTP 9000 o[opticheskiy] reflectometer (OTDR) - are let out modules with the standard and high dynamic range - the automation of the process of the measurement - dead zone during the detection of heterogeneities is less than 3,5 meters - the launch opportunity of measurements by pushing of one knob o[izmeritel] of optical power (PM) o[reflektometr] for the electrical cables (TDR) the o[opticheskiy] analyzer of spectrum (OSA) o[analizator] of polarization modal dispersion (PMD) o[analizator] of chromatic dispersion (CD) The change measuring module of optical reflectometer can work before the regime of the emitter of continuous power. The operating conditions of operating the instrument - the temperature of ambient air from 0 to +50°[S] - the relative humidity of air is not more than 90% with 25°[S] - atmospheric pressure from 70 to 106.7 kPa

Merits:

• software, developed on the base OS LINUX considerably increasing instrument accuracy
• control besides instrument is accomplished by means of the intuitively intelligible interface
• use as far as contemporary SYSTEM-ON-CHIP of the architecture, which ensures realization and integration of the contemporary interfaces
• function TOUCHSCREEN
• the possibility of the assembly of platform by the gauge of the optical power
• the built-in USB- port for the connection for the sake of the computer
• the possibility of remote control by means of the built-in port ETHERNET
• bright colored display with the high resolution
• overall sizes and weight, the low energy consumption
• the durable airtight housing, which corresponds to standard IP65

Technical characteristics:

Gauge of the optical power
Wavelengths of calibration, nm	850			1310… 1550
Range of the measurement of optical power, dBm	. +3… - 60			.0+… - 65
Error of measurement of power, dB	0,33			0,22
Error of measurement of the relative the levels of power, dB	0,17			0,11
Built-in source of the visible radiation
Output power, W	<500>
Detachable module of the optical reflectometer
Wavelength, nm	850 ±20	1320 ±20	850 ±2… of 1300 ±20	1310 ±20	1550 ±20	1310 ±20… of 1550 ±20
Dynamic range (OSSh -1) - standard, dB	30	29	28,3	36,5	35	36/34,5
- high, dB	-	-	-	41,5	39,5	41/39
Dead zone with attenuation measuring the detection of the heterogeneities	14,5/3,5
General parameters of the platform
Nourishment	Storage battery (not less than 6 hours) of /12/ ~220
Overall sizes, mm	243[kh]195[kh]56
Mass with the storage battery, the kgf	2,5

The combination of the platform, equipped for the sake of the gauge of power and module of optical reflectometer proposes irreplaceable instrument with the building, the installation and the operation [VOLS].